Creality cr10s pro - capacitive sensor, alternative mount
Description
This mod allows you to move the sensor off to the side of the machine. No longer a part of the hotend, but rather the frame itself. **************How to install************* * I used a few strips of 3M tape to secure the mount, then a few drops of loctite afterwards. * Install a nut and bolt, this allows you to secure the sensor once the height is adjusted. ********** Why i made this************ I made this after i had to replace the sensor. No replacement at creality store, so i found one at amazon " https://www.amazon.com/gp/product/B01M1777XK/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1" This works great, but lacks the option to adjust the gain as with the old one. The drawback then is that it needs to be much closer to the bed to function. I also had to add a sheet of aluminium foil under the glass to make it sence it. These drawbacks means that for the sensor to work at all, it need to be as close as 0.2/0.4mm off bed.
Statistics
Likes
6
Downloads
0