Toyota 22RE (4/8) / Front Drive Shaft add-on
Description
This is a Front Drive Shaft add-on for the 22RE Toyota Engine (https://www.thingiverse.com/thing:644933). The Drive Shaft is the same than the original : https://www.thingiverse.com/thing:1344976 The Axle Wheel Flange (2x) is the same than the original : https://www.thingiverse.com/thing:1344938 My finished project : https://www.thingiverse.com/make:692499 # Print Settings 1 x FrontDriveShaftBody : Layer:0.15mm Raft:no Support:no Infill:15% 2 x FrontDriveShaftBearing : Layer:0.15mm Raft:no Support:no Infill:100% # Accessories 1 x m4x25mm SHCS 2 x m4x20mm SHCS 2 x m4 jam nut 8 x m3x6mm SHCS 1 x m3x30mm SHCS 1 x m3 washer 2 x 623zz bearing # Mounting Fix the "Front Drive Shaft Body" to the "Bell Housing" with the m4 screws and jam nuts (see the picture). Mount the 623zz bearings on the two "Front Drive Shaft Bearing". Fix the two "Front Drive Shaft Bearing" on the "Front Drive Shaft Body" with the m3x6mm screws. Fix the "Axle Wheel Flange" with the m3x30mm screw and washer (see the picture).
Statistics
Likes
43
Downloads
0