Anycubic Kossel Linear Plus Top Cover with Filter, Extruder & Spool Mount
Description
I wanted to build the Anycubic Linear Plus Acryli Enclosure by kelvinA, but I needed a top cover to make the printer suitable for printing ABS. I also wanted to integrate an air filter, extruder and spool mount into the top cover. So that's what I came up with. Ther are also 2 holes (spaced 20mm appart) in the top. I used these to mount a thermistor for the passivly heated chamber. With this thermistor I control the fan in the top to don't overheat the machine (controlled by Duet Maestro with RepRap firmware). I mounted the thermistor in a 15x10x30mm aluminium block so it is not affected to strong by the draft of the starting fan. The cover is designed to work with kelvinA's Kossel belt tensioners. This is a filter you can use: https://www.amazon.com/gp/product/B01M0M6BLO/ To mount everything to the printer you will need: 1x 140mm fan 2x Fume filter 1x M3x10 screws (to secure the extruder plate) 4x M3x10 screws (to attach fan cover) 4x M3x14 screws (to attach fan) 9x M4x10 screws 9x M4 T-slot nuts 2x 608 bearings (spool holder) 1x M8 screws (spool holder)
Statistics
Likes
52
Downloads
0