E3D ToolChanger MotionSystem Titan Aero Dock Adapters
Description
** THESE HAVE NOT BEEN TESTED ON PRODUCTION PARTS, ONLY BETA HARDWARE. PLEASE VALIDATE GEOMETRIES BEFORE RUNNING MACHINE FULL-SPEED. CONSIDER THIS YOUR ONLY WARNING ** Edit 1: I believe that the dock adapters need an additional 0.5mm offset for the production hardware. I have a fix ready but am waiting for confirmation before re-posting a possibly incorrect file. Here they are: the dock / tool adapters to support 4x Titan Aero extruders on the E3D ToolChanger. Note that there are two sets of holes for aligning dock-adapter-bottom with the top-plate. This creates an x-offset to support larger 'Compact but Powerful' stepper motors. The part cooling tube is designed to fit a 5/32" aluminum tube: https://www.mcmaster.com/7237k15 You'll notice that there is no 'air supply' for the part-cooling tube. You're going to have to make your own until my machine has been upgraded to production parts. Many thanks to https://www.thingiverse.com/SublimeLayers for the original model to support Aero extruders!
Statistics
Likes
22
Downloads
0