Simple adapter to mount a Nema 8 on a Zesty Nimble V1
Description
Changelog: 1. Added the step files for the shaft coupler and the Nema8 mount for the Nimble V1. This adapter will let you replace the drive cable with a Nema8 stepper. There are two versions because the Nimble is ambidextrous. Choose the left-handed version or the right-handed version. There are also two shafts to connect the Nema8 shaft to the Nimble worm-drive. One where the setscrew is screwed directly into the plastic (no insert) and a version where you can use an insert in the shaft. This is experimental and not (yet) a formally supported method. The STL models are checked and optimised. The parts that need a different orientation to print properly are rotated to the preferred printing position. #### The Nimble Extruder With an installed weight of less than 27 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations. The Nimble is available from [Zesty Technology.](https://zesty.tech)
Statistics
Likes
19
Downloads
0