MPCNC Dust shoe + spindle mount 65mm for water-cooled spindle
Description
This is a combination of a spindle mount for spindles with 65mm diameter and a dust shoe which is mounted on the xyz-burly instead of the z-axis. So it is not forcing the z-axis and minimize your error. The dust hose and the water cooling hose are guided on a sliding mount which can follow the spindle across your MPCNC. I`m not 100% sure but I think Makita RT0700 and Katsu spindles need 65mm spindle mount as well. So it should work with them also. The acrylic glass is needed to be milled (the .dxf file is for your cnc-programm). Make sure you choose mm not inch. Please feel free to give me a feedback if it works for you as well or when you have any improvements. Things you need for assembling: 10 x M4 nuts 5 x M4x10mm 5 x M4x20mm 8 x M4x30mm 2 x M8x30mm 2 x M8x50mm 4 x M8 nuts 4 x ball bearings 608rs from the MPCNC Water hose 5mm inner- / 8mm outer-dimension Dust hose 40mm diameter 2 x 70-100cm steel or aluminium conduit with 25mm outer dimension Electric installation pipe with 32mm diameter like this one: https://www.hornbach.de/shop/Installationsrohr-starr-M32-grau-3m/5005525/artikel.html acrylic glass 3mm thickness 1 x cross connector fixing block like this: https://www.amazon.de/Kreuzverbinder-Fixierblock-Vertikale-Achsenhalter-Linearschiene/dp/B07T3K71XZ/ref=sr_1_fkmr0_1?keywords=kreuzverbinder%2Bfixierblock%2Bvertikale%2Bhalteklammer%2Boptische%2Bachshalter%2Bfür%2Blinearschienen%2Bcnc-teile&qid=1568286399&s=gateway&sr=8-1-fkmr0&th=1 1x wave pillow block 25mm like this: https://www.amazon.de/WAMO-Stehlager-Wellen-25mm-UCP205/dp/B00GUE2SVE/ref=sr_1_3?__mk_de_DE=ÅMÅŽÕÑ&keywords=lagerbock+25mm&qid=1568285954&s=gateway&sr=8-3
Statistics
Likes
62
Downloads
0