Fishing game joy-con adopters for real rod and reel (switch)
Description
Now you have the Labo fishing game, paper rod and paper reel, hm…fun. But can you play this game with a real rod and real reel? so I decided to do some 3D printed joy-con adaptors for both rod and reel. Make sure to check out the video in action. Too bad there is no real fish in this game :) Please check out the video before downloading/printing the part, so you know how they go together :) https://youtu.be/JbISm4GNRQ4 PLA is the recommended material. There are only two parts to print. But you need a cheap ice rod and a cheap reel. ice fishing rod for the length - https://amzn.to/3aprA2S Cheapest Reel I found in amazon - https://amzn.to/2vQFqvY Printed with: Material: PLA Layer height: 0.25mm Initial Layer Height: 0.15mm Infill percentage: 100% Infill pattern: line Printing temp: 210 Build plate temp:70 Flow: 100% Retraction Distance: 3 mm Retraction Speed: 10 mm/s Print Speed: 60 mm/s Travel Speed: 150 mm/s Initial Layer print Speed: 25 Initial Layer travel Speed: 30 Z-hop when retracted: enabled Cooling fan: 100% support pattern: zig zag support density: 15% Filament Brand PRILINE
Statistics
Likes
14
Downloads
0