VR Headset cooler mount
Description
this is a mount for 40x40x10/20 fans to reduce the sweating in vr to use this you need to print: Headset mount.stl and tightening nob.stl and fan mount 40x40x10.stl | or | (depending on what fan you have) fan mount 40x40x20.stl | you will aslo need an m3 nut and bolt of at least 15mm long but i would recomend 16mm i am using a 40x40x20mm fanfrom noctua as they are quiet prints without support
Statistics
Likes
3
Downloads
0