Gotway Monster 3. Under handle " PLUG " - no button
Description
If you upgraded to the newest shell, but didnt spent the extra for speakers and button. This is a press-fit parts that plugs the hole under the handle where the "motor stop" button would normally sit. * Print in TPU material. * TPU can easily be printed on bowden extruders, just dont go faster than 15 mm/s print speed, turn off retraction, 220c temperature on nozzle and 80c on bed. First layer should be higher up than normal as any back- pressure could clog the hotend or extruder motor. * extrusion multiplier at 1.10 Correct height on first layer is, a bit less than what a raft would be printed at. around 0.5 / 0.7mm I have printed myself. works
Statistics
Likes
3
Downloads
0