![DIY Climbing Sticks, 1/2" Bolt Grip](https://3dcrawler.ams3.digitaloceanspaces.com/thingiverse/3864517-DIY-Climbing-Sticks-1-2-Bolt-Grip-1723446589.jpg)
DIY Climbing Sticks, 1/2" Bolt Grip
Description
DIY Climbing Sticks, 1/2" Bolt Grip, These are not intended to be structural only to fit over the bolt and act as a grip/wider area for foot to rest on and not slip off. Bolts tend to be slippery and pressure points on feet. DIY Climbing sticks, Materials Needed 1 - 1" x 1" x 1/8" wall 16" length 2- 10" pieces of 1x1/4" steel bar stock (Bend in middle 90°) Drill 5/16 hole in the crotch of bend. 2 - 1/2" x 6{" bolts (GRADE 8) 2- 1/2" washers 4 - 1/2 Nuts 3 - 5/16 x 2 Bolts (Grade 8) 5 - over sized Grade 8 washer 5/16 1- 3/8 flange nut 3 - nylock flange nuts Assemble each step as show, Bolt - Printed grip - Tube (with bolt in middle) - washer bolt, Tighten Jamb wall between both nuts on far side away from grip Versa Button Type catch, from front to back Bolt - Oversized washer, 3/8 flange nut facing over sized washer - another washer - tube - washer - Nylock nut Stand offs, Bolt - Washer - tube - washer - Nylock nut And no if you are thinking I'm crazy and wanna lecture me this is not a strap I'd use at any height this was 1' off the ground just to play with and try before posting, just to lazy to get my proper straps out.
Statistics
Likes
7
Downloads
0