BLV mgn Cube X-Carriage for Titan Aero Direct Extruder
Description
Hi, that's my interpretation of the Re-X-Carriage ... It's a Remix. The following has been adjusted: 1.) Aluminum profile and MGN cars now fit perfectly in the gap 2.) The possibility to install the Duet Filament Monitor has been created. 3.) The position of the belt pick-up has been corrected. 4.) The fan bracket has been changed from 2 radial fans on the side to a radial fan on the back panel. Reason: The entire construction is much too wide in the original so the space is lost. The new position of the fan is not so. 6.) There is either the "normal" hose fitting for the cables to the HotEnd or a receptacle for a cable chain. What is needed: This cable chain: https://www.amazon.de/gp/product/B07LDCQTBN/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=crazyc-21&linkId=88fa9433fb055d49612812e000eec965&language=de_DE and this optical endstop: https://www.amazon.de/gp/product/B07LDCQTBN/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=crazyc-21&linkId=88fa9433fb055d49612812e000eec965&language=de_DE and of course Titan Aero: https://en.aliexpress.com/item/32815903993.html?spm=a2g0s.9042311.0.0.29154c4dmBvA6P Furthermore, the usual small stuff. M3 screws :)
Statistics
Likes
23
Downloads
0