Moskito 70 Parametric Battery Mount
Description
I redesigned the part in Openscad to easily print mounts for various battery size. You just need to adjust the battery height & width in the Openscad file. Tested with 2 batteries and fits perfectly: <ul> <li><a href=https://hobbyking.com/fr_fr/turnigy-nano-tech-950mah-2s-25-50c-lipo-pack.html>Turnigy Nanotech 950mAh 2S</a> Height:24.5 Width:14.5 <li><a href=https://hobbyking.com/fr_fr/turnigy-bolt-500mah-2s-7-6v-65-130c-high-voltage-lipoly-pack-lihv.html>Turnigy Bolt 500mAh 2S LIHV</a> Height:30 Width:10.5 </ul> <p>TODO:</p> * side walls are a bit thin, it's good to keep a low weight, but may brake to easily. * depending on battery size, the battery will rest on the main frame itself or on the part covering the ESCs and need to take this in the final height calculation for the part.
Statistics
Likes
3
Downloads
0