Ender 5 Plus Hot End Cable Guide
Description
This is a piece to support the wire going to the hot end on the Creality Ender 5 Plus. The V4 file is meant to be connected to the printer with 2 M3x10 machine screws and 2 M3 T-nuts, the tube is meant to be connected with a zip tie or twist tie. This piece is very stable and can be moved along the top rail to more locations. The nuts I used are from this pack: https://www.amazon.com/Sutemribor-Hammer-Fastener-Aluminum-Profile/dp/B07FPLZXTF/ref=as_li_ss_tl?keywords=t+slot+nuts&qid=1574956772&sr=8-8&linkCode=sl1&tag=cadparts-20&linkId=2c4d84d4fa7cca9e400df3db90be9196&language=en_US It can be seen in use here: https://drive.google.com/open?id=12g3MVGTfqX0aOl3Q3Csa94k9qGYqDQLI The No Nut version can be installed without any extra hardware. I have not been successful pushing this straight down to get it to clip on, you need to clip one side and lever it in. You do not need print this version with supports. EDIT: I have added a more flexible version (Ender5PlusArmV5Thin.STL) of the no nut version as some people had trouble attaching the first version. I have not tried it and do not recommend trying it unless you cant get the first version to work.
Statistics
Likes
328
Downloads
0