Caddx Turbo EOS2 FPV Camera Mount for X2-ELF Frame Kit
Description
It is difficult to install **14mm** width FPV cameras in the **X2-ELF** frame kit due to its narrow space between two front standoffs. Therefore, I designed this camera mount to accommodate the **Caddx Turbo EOS2 FPV camera**, which has a relatively large lens in its class. [Details for the build](https://rotorbuilds.com/build/20093) # Specification 1. Camera Tilt: * 0-45 Degree Adjustable * 45 Degree Fixed * 30 Degree Fixed 2. **Fixed angle** version doesn't need screws, so I also provided **no_ear** version # Note 1. When using 45 fixed angle version, **DO NOT** over-tight the screw if you notice the top plate is pressing the lens too hard. There are two solutions for this case. 1. Try **30 Degree** or "Adjustable" version 2. Try to add a nylon washer to slightly increase the height and protect the lens.
Statistics
Likes
10
Downloads
0