Heavy Honeycomb 2.5" HDD/SSD enclosure
Description
Heavy case for my 2.5" HHD *** Please visit https://www.thingiverse.com/thing:3612142 for more pictures showing the assembly *** Minimal printer size : 50x90x120mm Estimated time : 7h No brim or raft needed #Bill of material * 4 M3*18 screw with nuts * Protection foam or thin rubber * SATA to USB adapter https://www.aliexpress.com/item/SATA-Cable-Converter-USB-3-0-Cables-22-Pin-SATA-Hard-Drive-Adapter-Laptop-2-5/32998925790.html?spm=2114.search0604.3.7.3efd7a5718cWvx&ws_ab_test=searchweb0_0,searchweb201602_5_10065_10068_319_10892_317_10696_10084_453_454_10083_10618_10304_10307_10820_10821_537_10302_536_10843_10059_10884_10887_321_322_10103,searchweb201603_52,ppcSwitch_0&algo_expid=30bd26f7-abef-4803-a4c4-8b6a51e1c138-1&algo_pvid=30bd26f7-abef-4803-a4c4-8b6a51e1c138 or https://www.ebay.de/itm/USB-3-0-SATA-to-USB-2-0-Adapter-Cable-USB-2-0-TO-USB-3-0-SATA-7-pin-connector/263976713478?hash=item3d763cfd06:g:k7wAAOSwIVVcahFv:rk:48:pf:0 #Assembly * First open the adapter and assemble the 2 small parts with 2 screws * Add protection foam, rubber (<1mm thick) or thick tape around disk before mounting the last part. * Be careful the the side. The disk may have a "Do not cover" hole. And do not cover it * You may have to sand a little the 2 small parts (where there is the screw hole) if you have printed with support * Assemble the third part and close the case with 2 screws #Sample print settings Small parts : Infill : 30% Support density 10% Speed : 60mm/s Layer thickness : 0.2mm Time needed : 2 * 1h30 Big part : Infill : 20% No supports (vertically printed, screw hole at the base) Speed : 80mm/s Layer thickness : Adaptative Time needed : < 4h
Statistics
Likes
26
Downloads
0