Alexey Navalny's letter N, 3Dfied, segmented
Description
[The 3Dfied letter N of Alexey Navalny](https://www.thingiverse.com/thing:3872827) halved vertically for 3D printing it bigger and with [connector](https://www.thingiverse.com/thing:3869168) slots not to require any glue. **Do not print the segment connector part as-is!** The connector slots have been made by boolean or operations, so they're exact in theory. But **in the field** they seem to be "too exact", so the connectors are **a bit too big** to be plugged into their slots. Solution: 1. Place all models on the slicer's build plate. 2. Scale all of them at once as you need. 3. Scale the segment connector part's shortest side a little bit down, e.g. by a small multiple of the line width. [This one](https://www.thingiverse.com/make:716889) (scale: 200%) required a tolerance of 0.3mm, but for [this one](https://www.thingiverse.com/make:716887) (scale: 100%) 0.2mm were enough. 4. Copy the segment connector part 7 times.
Statistics
Likes
0
Downloads
0