QQ-S Filament holder and spool
Description
I created this for my Flsun QQ-S Pro, didn't like the way the other one was, too much resistance. So I created this for the spool I got off of here, I don't have the link, so I included with the download. Instructions To fit it to the printer, put it in the spot you want and use a marker and mark where the holes should be through the top of the printer. Then drill the holes, 4mm or a 5/32 drill. I did this because I have heard they aren't in the same spot on all printer. Other parts you will need 1. 5/16 or 8mm dowel rod 2. m4 x 16mm screws (2) 3. m4 washers (optional)
Statistics
Likes
29
Downloads
0