Eco FPV / DIY FPV Goggles - Monitor mount & additional parts
Description
Following Some Very Good Discussions On Fpv Forums, I Decided To Purchase A Eco Fpv Goggle Set From Flyingwings.Co.Uk. The Kit Comes With 2 Epo Foam Shells And Requires A Monitor To Be Installed At The Flat End Of The "Box". This Thing Includes: - The Backplate Which Suites The Below Listed Monitor For A Plug&Play Fit (Follow The Pictures Included Above To See How It Drops In - A Bit Of Double Sided Tape Between Monitor And Pcb Will Hold It In Place Even Better). The Backplate Is A Press Fit After The End Of The Epo Housing And Does Not Require Any Glue To Keep It In Place. - Strap Supports To Secure The Strap (Glue It In Place, Use One Support Inside The Goggle And One On The Outside On Top Of The Strap And Secure With 2 Zip Ties) - The_Muck'S Excellent Fresnel Holder To Replace The Flimsy Plastic Sheet Holder That Comes With The Kit (Please Check Out His Original Thing Here Http://Www.Thingiverse.Com/Thing:380776) - The Eco Epo Goggle Kit Can Be Found Here: Http://Www.Flyingwings.Co.Uk/Index.Php?Route=Product/Product&Product_Id=411 - 5'' Monitor Used For A Plug & Play Fit Can Be Found Here: Http://Www.Dx.Com/P/Diy-Hd-5-Tft-Lcd-Display-And-Parts-Module-Black-Blue-Silver-480-X-800-202988#.Vemdipmufgc - On Top Of That You Can Buy A Better Quality Fesnel Lens From Ebay (Just Search For It, Multiple Sizes And Options Are Available)
Statistics
Likes
80
Downloads
0