2020 Racquetball Foot Set for Creality Printers
Description
I found that the normal feet around didn't support the new stock feet configuration of the CR-10's with the 3 hole setup rather than adding a bunch of T nuts to fix all the feet I wanted to create a set that fit everything. So I did. The holes are fitted to M4 Screws and should be M4x15 for stock Creality replacement, M4x10 for T-Nut versions. A set for the 4 feet stock replacements, a second set for additional Y bracket that does use T nuts but lets you support it in the center for even more support on the CR-10s 5 with extended length to allow it to hit the floor with all the others. Finally, a universal set that is like most you see 4 holes for ender and older models etc. This should work with any CR-10 clone Tevo's etc. Please note this is a work in progress and may be modified. Any problems please leave a comment.
Statistics
Likes
1
Downloads
0