15-Berth Aero Dock Benchy Stand v1
Description
Aero Dock Boat Stand for any growing 3dbenchy collection (benchy here: https://www.thingiverse.com/thing:763622 ). * prints without supports * I wanted a stand that could hold the benchies facing outwards, suspended in the air. This is the result. I divided the lower and upper decks to help minimise risk of failed print. Instructions: Print the deck and top and brackets. Don't use too brittle a material, as the holder uprights are quite thin. Name your boat using the sign customiser Ensure each bracket holder has a space between the uprights and then carefully slide each bracket downwards into the bracket holders. Slide the nameboard into its slot. Now slide each benchy into a bracket, they should clip into place fairly well but still be able to clip out again. Mount the dock on a wall using the screw mounts if desired and add more benchies as you print them. I suggest printing at 0.2mm layer height and at least 20% infill.
Statistics
Likes
40
Downloads
0