Peristaltic pump 10mm with makerbeam mount
Description
This peristaltic pump is basically hiuwo's pump upscaled, to fit 10mm (so very big) silicone tubes. More info + a video in the blogpost on the makerbeam blog: https://www.makerbeam.com/blogs/makerbeam/pancake-machine-2-7-3d-printed-pumps/ The pump is bigger, but also higher then the original design. The insides of the gears and the pump are also changed from the original design, so that the bigger tube is also closed off by the gears. Also there is a bracket to easily mount the pump to MakerBeamXL profiles. You can simply screw the nema 17 motor into the bracket, and then press the pump on the mount and motor.
Statistics
Likes
26
Downloads
0