HobbyWing XR8 Plus ESC Mount/Tray For Tekno's MT410
Description
The Idea of using 2 sided tape to secure the ESC to the MT410 didn't seem like it was strong enough so I came up with this design. After printing the 'HW_ESC_Base_v9.stl' you will need to insert the 7 M3 brass inserts using a heat source like a soldering iron to heat up the brass inserts. Glue the 3 o-rings to the 3 brass inserts that are on the bottom of the 'HW_ESC_Base_v9.stl'. Mounting the ESC to the ESC base using the ESC bracket first then securing that assembly to the Tekno MT410 chassis. B.O.M. 3 o-rings (optional). 7 [M3 x 3.8mmL](https://www.mcmaster.com/94459a130) McMaster-Carr brass inserts. 4 M3 x 6mm button head bolts. 3 M3 flat head bolts that came with the Tekno' MT410 for securing the ESC tray to the MT410.
Statistics
Likes
11
Downloads
0