FR10-G Quadcopter Frame
Description
A slight modification to the FR10 quadcopter frame that replaces the top and front plates with a more traditional construction for people who prefer not to have lots of 3D printed components. Features: - Compatible with Super-G TPU GoPro mounts. - Mini FPV cam compatible using Alien-style side plates, or micro cams using TPU mounts from the front standoffs. - Fits DJI FPV camera and air unit up front. - Both GoPro and FPV FOVs should be clear of props. - Even more space for big batteries on the top plate! The frame plates are designed to be the following thicknesses: - Arms: 7mm - Front plate: 3mm - Rear plate: 3mm - Top plate: 2-3mm HARDWARE: For airframe: - M3x18 round standoff x6; rear plate (I ground mine from a M3x20) - M3x28 round standoff x6; front plate - M3x16 button head x12; arms - M3x18 button head x6; centre posts and stack - M3x8 button head x14; plates - M3 press nuts x12 - M2x5 cap head x2; FPV cam For motors - M3x10 button head x16 Note: The FPV camera side plates are an interference fit, so will require some sanding to fit. The tighter the better. Link to the original frame: https://www.thingiverse.com/thing:3652100
Statistics
Likes
9
Downloads
0