Gatehunter Neo
Description
The Gatehunter Neo is an all new performance frame designed for setups with 20x20 stacks and bigger motors (2207 and more). Using only 20x20 stacks made it possible to design this frame to be very aerodynamic and light (66g). The increase in top speed and acceleration is absolutely noticeable and it corners like there are no laws of physics holding it back ;-) **Please note:** Be very careful to only maiden these setups in a safe open space. Especially on 6S, the betaflight stock PIDs are way too high and the flight controller might accelerate the quad uncontrolled. I recommend reducing them all by 30-40% to start with and then work you way up to da good tune. **Frame Specs:** - 5" stech X - 66g including everything - 20x20 stacks only - 16x16 motor mounts - 19mm cams or 14mm with adapter - Canopy designed for Micro Axii FPV antenna **My recommended high performance Setup** (only 255g w/o LiPo despite the massive motors!) - **Motors:** [Rcinpower 2207+ 1860kV](http://bit.ly/2kPgKhY) - **FC/ESC Stack:** [Diatone F722 Mini 6S 30A](http://bit.ly/2m8HfQa) - **VTX:** [Eachine Nano 400mW](http://bit.ly/2MnlfM7) - **Nano Cam:** [Foxeer Predator Nano](http://bit.ly/2mQ1LoR) - **Batteries:**[GNB 1100mah 6S](https://www.banggood.com/custlink/GGm36EwQCG) **More 6S capable 20x20 stacks:** - [Holybro Kakute F7 Mini](http://bit.ly/2nDKvmS) - [iFlight Success F7 Mini](http://bit.ly/2m4ig0l) **Budget (but still good) Micro cam options:** - [RunCam Nano 2](http://bit.ly/2MsUB4B) **The best 2207 budget motor options:** - [Emax ECO 2207](http://bit.ly/2SelHgJ) - [iFlight Xing E](https://www.banggood.com/custlink/DKmDBd1Q6G) **Required Steel Hardware:** - 8x M3 nuts (not locknuts) - 6x M3x14 - 2x M3x18 - 1x M2x8 (to secure the canopy in the rear) **Required Carbon Parts:** - 4x Arms (5mm) - 1x Bottom Plate (4mm) - 2x Top Plate (2mm) - 1x Brace (4mm) https://www.youtube.com/watch?v=3bF9UyYnASo&t=8s
Statistics
Likes
83
Downloads
0