iPhone 6 gear case with Geneva Mechanism
Description
This is an iPhone 6 version of the "Improved! iPhone Gear Case with Geneva Mechanism" by QuentinT. I could not find a version for the iPhone 6, so I made one. Make sure to print 2 of 3x2.75_mm_pin_2.stl as well as 2 of riser_1.stl. Follow the picture for gear placement. The pins fit snugly into their respective gears, so you should be able to easily tell which pin goes with each gear. Carefully use superglue to keep the pins in place. This can be done by placing each gear and pin in their spot and supergluing the pin on the inside of the case one at a time. The risers should go underneath the "21-2_tooth_upper_left_connected_to_big_gear_and_upper_left_connected_to.stl" and the "21_tooth_upper_left_connected_to_big_gear_and_upper_left_connected_to_gene.stl" gears. This is a replacement to make up for not having the original case ridge. Enjoy your iPhone 6 gear case! https://youtu.be/CueiCiQSyiM
Statistics
Likes
21
Downloads
0