Huina Excavator Blade
Description
** This is a blade/plow for my 3D printed Huina Undercarriage ** * Needs a N20 geared motor with M4x55 thread, 100 rpm for best torque * Requires my complete Undercarriage, will not fit the stock one ! * * https://www.thingiverse.com/thing:3766084 * Requires a modified remote for the additional channel, **will not work** with stock 550 remote. * Requires an additional brushed ESC to plug the N20 motor into (10 amp is fine) * Requires a couple ~2.5mm holes to be drilled and (12x) M3 screws of various lengths * Added a complete blade if you don't want to print in 2 parts * UPDATE : New N20_case_half_v2, blade_frame_middle_v2, blade_cylinder and upper_mount_v2 Tested working October 2, 2019 ! Comments / Suggestions welcome. ** I got lots of people adding this to their "Warhammer 40k" collections. Not sure why, but this is NOT related to Warhammer. This is a part for a remote controlled toy excavator sold as the "Huina 1550" **
Statistics
Likes
77
Downloads
0