Hole In One Display
Description
This is a base display and WILL require modification. I have included the stl files as well as the sketchup file (2017) that I used to modify these from the original. There are several different versions of the display. A 1, 2, 3 ball display. The 2 ball display was also modified to fit on a ender 3 print bed. The display is only the back and ball holders as each individual will wish to print out their name, course, hole and date. I also modified the ball holder as it was slightly offset from the back and cause it not to print. Other things of note: I printed with concentric which did not turn out well. I would also make sure that the print looks ok in the slicer. Mine had some long bridging on the back that I didn't catch and it was not able to print as well as I would have liked. Of course it is on the back and doesn't affect that functionality. I also used only 10% fill. Because of the large face and concentric I had some stringing. When you add your own text I used 12mm for the Name, 8 for "Hole in one" and 5mm for that Data/Location. The text thickness was 2, 1.5 and 1. I would recommend a bit more than that. Maybe 2.5, 2 and 1.5. The 1mm text thickness was a bit too little. I used a sharpie marker to color the top text and that seemed to work well. I also used Cooper Black as the Font.
Statistics
Likes
1
Downloads
0