VESA Mount (200mm) for ssd/hdd and Raspberry Pi 2/3
Description
This is a base for raspberry pi 2/3 and a 2.5 inch (laptop) disc. It's designed to mount on back of a display (such as television) in VESA mounts (distance between holes 200mm). If You want you can print and the lid provided. You will need two VESA screws for mounting in back of display (2 of 4 holes are used) and 3 small screws for mounting raspberry on base. The cables for usb and LAN are going out from the bottom (see the photos), and there is also a hole in lid to go out the raspberry pi 2/3 power and HDMI cable. BE CAREFUL when you get out the lid from printing base, this is very thin (to keep lightweight with less material possible), also be careful when you get the support material out!
Statistics
Likes
11
Downloads
0