Flashlight barrel mount
Description
Simple to print without support. There will be stringing but just remove it. I lost my oridinary mount so i created one of my own. It fits perfectly with my Ledlenser flashlights on both .308win and .338winmag barrel Barrelhole 16mm Flashlighthole 25mm (Use flexible filament, not PLA or ABS !) I used TPU 90A Speed 30mm/s Infill 25% (more fore harder) Print temp 220C Build plate 50C No Retraction No Support Brim 8mm Added a V2 If you print V2 add more infill or use a harder flexible filament Please "post a make" and share picture if you make one :-)
Statistics
Likes
2
Downloads
0