The Little Prince Boa Fridge Magnet
Description
<b>The Little Prince Magnet</b> in two pieces (base and top). A <s>hat</s> boa constrictor digesting an elephant with cross-section. Main version is for 2 colours (one works too) - base, and outline. There is a version with 3 colours (third is mostly for elephant) - as on photo. <b>Single extruder, 0,4mm (or 0,1-0,2mm). 0.2mm layer works well</b> Check in slicer when you will need to change a colour (if you want to change it) <i>When printing for a fridge magnet remember to first glue the magnet (or magnetic tape) to base and then <b>check if your second magnet (or metal) will stick to it from the other side</b>. If it will so you can then glue it to 'top' model: - Put magnet/metal inside elephant on base model (glue outside) and then carefully attach 'top' model to it (try to line up both models) - I put magnets inside elephant's thorax, leg and earlobe - If you don't have strong enought magnet for top part you can try to lower base model in your slicer (up to -0,6mm on Zaxis) - or you can use just base model if you want, or both as separate magnets.</i> Video with magnets on fridge: https://youtu.be/WFZWVZwfmBk <b>Edit 05 X 2019</b> Added an image of how to use magnetic tape. --- Little Prince Tealight cover https://cults3d.com/en/3d-model/home/little-prince-tealight-cover
Statistics
Likes
11
Downloads
0