H-250 Quadcopter Quad Copter
Description
H-250 Quadcopter Frame Consists Of 4 Arms - I Use Zmr 1804-2400Kv Motors Or Similar And 5030 Props - Could Possibly Fit 6 Inch Props. A 3 Part Frame Consisting Held Together By Nylon Hex Stand Off Spacers From Ebay. The Middle Frame Section Has Slightly Longer Middle Lugs To Accommodate The Flight Control Board - Kk2 Fits Nicely Using A Kk2 3D Printed Case. 2 X Landing Gear A Slot In The Grooves On The Bottom Section - Nice Snug Fit, However Could Be Fixed With Hot Melt Glue If Required. A 1300Mah Battery (Measured An Overlander Battery) Should Sit In Between The Landing Gear, H-250.Stl Isnt For Printing, But To Just Give An Idea Of The Build. Ive Now Resized The Thickness Of The Arms As They Weren'T Thick Enough.
Statistics
Likes
161
Downloads
0