[r1] Anycubic Kossel 5015 Mount and Wire Harness

Description

Saw VitaliySh's idea for a 5015 mount and decided to make a cover that used one fan at the front of the effector. You might need longer screws than stock for this. You will also need an M4 x 20 or longer for the 5015. Updates: - r1 23/06/2020: - Added Fusion360 and step files - Non-unibody version depretiated - Offset face To install this, - First install the 5015 with the M4 bolt. - Unscrew the 4 bolts from underneath the effector so that you can rotate the metal box 180 degrees. You may want to loosen the top 4 screws holding the hotend so that the box can rotate freely. Screw the 4 bolts on the bottom back on. - Screw in the front right bolt of the hotend clamp back on to keep it in place. Unscrew the other 3. - Install the CoverMain using 2 screws. - Fit the wires into the side and use a cable tie to attach them to CoverPart. Then use the last screw to install.

Statistics

Category

Tags