Dji Mavic 2 Enterprise Cover/Mount
Description
In this project you have available 2 models Cover If you broke clips on top cover(what is really easy to do) you can replace top cover with this one. Cover can hold without screws only by friction between plastics, but recommending to fix it with 2 M3x10 screws, best with flat head. You can post process top surface with sandpaper to increase aerodynamic. Mount If you want to create your own attachment for M2E/D, you can use this model in STEP format as baseline. This Mount model is significantly thicker than Cover. Recommending to use same printing direction as is designed, since in this way you will not suffer from reduced strength between layer bonds. Fixing is designed for 2 M3x12 screws.
Statistics
Likes
21
Downloads
0