CARduino controller: Arduino based rc car radio transmitter
Description
Hi everyone! This is an arduino based RC car/boat controller. It's equipped with a steering wheel and a trigger for throttle control, both datas are acquired through common potentiometers. The electronics are fixed on the back plate trough a PCB board (3x7 cm) and must be soldered like shown in the images. The non-printed parts needed are: -1x Arduino nano -1x NRF24L01 (wifi module) -2x potentiometers -1x 3x7cm PCB board -1x 18650 Battery -2x Rubber bands -1x velcro strap to hold the battery -some wires to connect electronics -5x M3 screws (to mount front plate on back plate) -3x tiny screws to mount PCB on back plate. I uploaded my Arduino codes (transmitter and receiver) with the stl files.
Statistics
Likes
198
Downloads
0