Balancer for Propellers and Spinners
Description
Prop & spinner balancer "inspired by" Dubro Tru-Spin :) Print settings: bok1.stl and bok2 stl layer height: 0.2 mm bottom layers: 5 top layers: 4 outline/perimeter shells: 4 infill: 20% mocowanie.stl and mocowanie_nakretka.stl: layer height: 0.1 mm bottom layers: 3 top layers: 3 outline/perimeter shells: 3 infill: 20% other parts: layer height: 0.2 mm bottom layers: 3 top layers: 3 outline/perimeter shells: 3 infill: 20% In addition to the printed parts you will also need: 8x M3 bolt 16 mm long 8x M3 nut 8x plastic screw 3x9mm 4x ball bearing 3x8x3mm 4x M10 widened washer (10,5 mm inner diameter, 30mm outer diameter) 4x steel rod 3mm diameter, 150mm long, And it works :D https://www.youtube.com/watch?v=UNz5FRcxoVI As you can see, this propeller badly needs balance ;)
Statistics
Likes
11
Downloads
0