Monitor shelf to mount beneath LG 29UM58-P (adaptable)
Description
My monitor is mounted by an articulating arm, and I wanted a storage shelf attached below in the space where sticky notes usually live. Specifically, the goal is to mount an apple-watch charger, elgato streamdeck mini, and my phone. Plus pens and whatever. Built this shelf to use the available screw holes formerly for mounting the base. Some holes are added to store pens, cables, etc, and to improve aerodynamics at high speeds. Added some additional holes left and right in case I choose to extend it laterally, by adding more pieces. Cura thinks it will print in about 11H on best settings. Some supports added for large cable routing holes. The main circular gap is wide enough for USB. Hole spacing is verified. EDIT: I uploaded a newer version with slightly thinner and taller vertical piece to make use of shorter screws, and added two small triangular mounts to add strength. Added middle gap to create wiggle room for mounting. If it's too tall for your needs, stop the print at the right height, or just cut the thing to suit. Object is on TinkerCad as "Under monitor shelf for lg 29um58-p" if you want to remix.
Statistics
Likes
17
Downloads
0