TBS Source One V3 Arm Protectors
Description
*****The model printed was the "Very_Slim" version...!***** *NOTE: I made multiple heights so you can adjust the frame height from the ground by using different models. ( I have only printed the "very_slim" version but the others sould work) IMO this is the best landing pad/ arm protector for a source one on T.V....! :) It's only a remix of a arm protector and a landing pad but once their combined they become an amazing accessory..! The center hole is so you can remove the bell without removing the landing pad/ motor screws.(my 2mm driver fits snug but works great.) Hope you find this useful...!!! :) If you have any questions please feel free to ask.! I'll try and answer asap. ( please keep in mind I work alot) *Things used...! Arm Protector: https://www.thingiverse.com/thing:3552335 Landing Pad: https://www.thingiverse.com/thing:3176233 Thanks for the original designs..!!! Hope you guys like how I've used them. ***FYI: these were printed in TPU with supports at .175 layer heights.*** ***And it was printed upside down so that the nice sides face out. it should open in the correct orientation*** ADDED- 03/31/2020 ***I think I printed these with 4 perimeters, 4 or 5 top/bottom layers, and around 30% cubic infill*** ***I'd LOVE to see how you guys use these things..!*** ***Feel free to post photos of your makes.!*** ***ENJOY.!***
Statistics
Likes
87
Downloads
0