Power supply mount for Raspberry Pi (Step down board mount for 2020/4020 profile)
Description
This is a simple mounting bracket for a step down board. It can be used to create a 5V power supply for your Raspberry Pi, but it can also be use for many other purposes. Mounting can be done with 2 pcs M4 screws and T-nuts/hammer nuts. The board can me mounted with 2 pcs M3 screws. They wil tap into the plastic. This was created for a XL6009 step up/step down board. Not all boards have the same mounting points so i can not say anything about the compatibility of your board and this mount. The size of my PCB is approx 49 x 23,5mm if it helps Mount to a 2020 profile, 4020 profile or any other mounting points that you like. This design is universal but was also optimized for providing power to a Raspberry Pi in a Anycubic Kossel Lineair Plus. All other mounts for this purpose can be found in the links below: Raspberry Pi mount: https://www.thingiverse.com/thing:3912074 Accessory switch mount: https://www.thingiverse.com/thing:3912189 Hope you like this design. If you have any questions let me know, and if you like what i do, follow me for new designs.
Statistics
Likes
10
Downloads
0