Emisar Flashing Kit Pogo Pin Case
Description
This is a case for the pogo pin adapter for the Emisar flashing kit sold by Hank at intl-outdoor. The lid of the case is a friction fit so I have included different clearances for different printer tolerances. I use the .05mm clearance on mine. There is a hole in the top to use a hex wrench to pull it up, in case you have to take it apart. ***10/16/19*** A revised version has been uploaded that still protects the pins but leaves enough clearance to easily get the pins on the pads without having to hold it at an angle.
Statistics
Likes
2
Downloads
0