4" Inlet Suckit Compatible Dust Shoe
Description
This is a 4" inlet shoe that is compatible with the suckit dust shoe mounting brackets for the SO3 with the HDZ upgraded Z-axis. The light blue is the 2.5in Suckit dust boot that I bought. The black is the 4in dust boot I designed. Here's the parts list to finish it: **Brass Inserts:** https://www.mcmaster.com/94459a280 **Socket Head Cap Screws:** I bought a box of long ones and use my dremel to cut them down to the correct size since I was not sure what length I needed for the different locations. https://www.mcmaster.com/92196a152 **1" Brush Strip:** https://www.mcmaster.com/7900t1 **1/4" x 1/4" Cylinder Magnets:** I use these in my cribbage boards, so I already had a couple of hundred laying around. https://www.kjmagnetics.com/proddetail.asp?prod=D44 Here are a few other items for dust collection I have designed: [WEN 6321 Belt Sander 1.25" hose adapter](https://www.thingiverse.com/thing:4662054) [WEN 6321 Belt Sander 2.50" hose adapter](https://www.thingiverse.com/thing:4253733) [Bosch 5" Random Orbit Sander (ROS20VSC) 2.5" Hose Adapter](https://www.thingiverse.com/thing:4253776) [6", 4" and 2.5" Duct Adapters](https://www.thingiverse.com/thing:3779320)
Statistics
Likes
12
Downloads
0