TBS Source One v3 - DJI FPV mounts (antenna / airunit mount & arm bumper and skid)
Description
TBS Source One v3 DJI FPV mounts Has an antenna mount Airunit mount and an arm bumper / skid combo To fit the airunit in the back you need to remove the back standoffs, but if you feel adventurous you can drill out the top plate to move the standoffs just a bit and screw them to the top plate only, it does offer a bit more structural integrity compared to completely removed The arm bumper / skid combo is a really tight fit so it doesnt move or cause issues in case of a crash, just wiggle it and work it a bit to get it on, fits like a glove here is the onshape cad file, feel free to modify it as you please * Antenna mount https://cad.onshape.com/documents/41bf88d28ec751c749fd3b92/w/e31d20a5ad3450d181574e47/e/ec262309b57828dbcce4767f * Arm bumper / skid https://cad.onshape.com/documents/ddd9e6bebeed8d2942b25b24/w/75ea9cbbf816fb4dee1488b8/e/e76c29ffdf1f6252a91e5d42 * Air unit mount https://cad.onshape.com/documents/a0e2e553fb678b4076629216/w/cae8ec5384e35e3e3ff77d07/e/5874fe8a8348fa20aedfa401
Statistics
Likes
40
Downloads
0