vintage Wet Stone Sharpener 1/4 scale improved
Description
This is a 1/4 scale working model of "Antique 1934 Soeensen Co Triple Wet Stone Professional Sharpener" That ew improved by adding 3 more stones and an angle guide. It is the 5th version of a model I posted earlier. as seen here https://www.thingiverse.com/thing:3915466 You can keep this machine by your printer. It requires no setup and will get all your tools razor sharp The body will need supports The box should be printed in a high resolution & 100% infill to make it water proof I used ABS but other filaments should work I used a 7 stone set from Cheerbright on Amazon. You will also need a 5/16 or M8 bolt washer, washer and nut. cut the 150mm stones in half by scoreing with a file and breaking. Use 6 of them in the machine and save the rest Stick the stones in with a couple dabs of "poster puddy" so they can be removed.. You can use oil or water for a lubricant. I like oil.
Statistics
Likes
7
Downloads
0