T16 - (TBS honey) stick protectors - Magnet Clip
Description
Stick protectors for the Jumper T16 and TBS Honey!! These are intended to snap to the set screw of the gimbals with a magnet to keep them neatly into place. These stick protectors are especially designed for "TBS honey sticks" with a Ø14. 2 versions inside: FFF and SLA FFF 0.1mm layer height If you don't mind cleaning up the traces of the support structure than these are the original files. I recommend a tiny round needle file to start with than finish with wet sanding. And of course a touch of paint never harms the looks. SLA 0.05mm layer height These files have a closed bottom of 0,1mm to make sure they stick to the build plate. That layer is easily removed and the edges should be trimmed other than that some light sanding and some paint. After completing the models glue in the magnets, nothing fancy some CA glue will do. https://www.supermagnete.de/dut/schijfmagneten-neodymium/schijfmagneet-4mm-3mm_S-04-03-N Happy crafting!! p.s. you can always contact me if you want a finished pair!
Statistics
Likes
7
Downloads
0