FLIR Scout TK PVS-14 compatible mount
Description
After buying the FLIR Scout TK, I wanted an easy mounting system to actually use it on a PVS-14 NVG mount. After a few iterations, I came up with this. It may aim down slightly when installed, so adjust the angle on your Rhino mount or whatever to compensate. It's also not compatible with a left-eye mount being swung to the right eye, it will likely be in the way of your nose. Figured I would release this to the public since a lot of people were looking for something like this online, and I'd rather release it for free than profit from it. You'll need 2 M3 bolts and nuts to assemble it. The nuts go into the little slots on the side. You have to slide the monocular through the big hole and then dog down the "smaller body" model on the back near the eye piece. It should be pretty straightforward to figure out, but let me know if you have any questions in the comments. It has multiple mounting holes on top to accomodate different distances from the eye. Also, make sure you install it so the buttons face down or you'll have a hard time pressing them. Finally, this covers the charging port, so you'll have to remove it to charge it. If there's enough interest, I will design a version with a hole to charge it.
Statistics
Likes
25
Downloads
0