Acro RC airplane
Description
First try to made a rc airplane with a 3d printer. Result is 440 g. with battery You can see performance test of motor with various prop Motor is a multistar V-spec 1808 20A Esc (that is limit if you use a 3 blade prop) and a 1000 battery I use balsa wood 4mm for reinforcements near motor and for servo supports I use a polyester rod for move the rudders (reinforced by cyanoacrylate glue) Note: this motor has a high torque, so i need use a mix in transmitter radio for give anti-clockwise set on wing ailerions, connected to engine power
Statistics
Likes
37
Downloads
0