Coraline Dragonfly Pin
Description
This is a quick dragonfly pin for a Coraline costume which I am helping out with. It was designed in CAD and crudely textured with meshmixer. I will upload the original STEP for anyone to play with (that has better meshmixer skills than I do, which is pretty much anyone). <strong>The file is small so I would recommend scaling 665x in the slicer when printing (or whatever you need for your pin). It is about 7.4mm wingtip to wingtip otherwise which is waaay too small. I also pushed it down a few mm in the build plate in Cura to thin it out a bit. </strong> Three files are uploaded - the following are models for folks that want to remix or re-meshmix this, since my attempt is pretty bad: dragonfly-MODEL.stp dragonfly-OBJ-MODEL.obj <strong>This is the one to print, but will need to be scaled. I scaled one to 830x and it ended up a bit big, with about a 2 1/2" wingspan. I'd suggest scaling to about 665x which should be around a 2" wingspan. </strong> dragonfly-PIN-PRINT.obj I plan to glue a metal hair clip to this, paint it in gold paint and glue some sequins to it. Will remain a work in progress till competed, but really there is not much to this that can go wrong :D I recommend printing at 0.1mm resolution.
Statistics
Likes
16
Downloads
0