LessTiny e-Lab
Description
I totally love the [Tiny e-Lab](https://www.thingiverse.com/thing:2999383) idea by @marcluer, but as I wanted to add oscilloscope at first and later make use of a bit more capable power supply module with buck-boost I ended up completely redoing the _thing_. The sizing of this is completely different (front face is 90mm tall) from the original [Tiny e-Lab](https://www.thingiverse.com/thing:2999383) * Oscilloscope: UCE-DSO212 slightly modified and powered on 7V to enable 5V Signal Generator by [this module](https://www.aliexpress.com/item/32853268615.html) * Power supply: DPH-5005 with Bluetooth module * Soldering iron: TS80 (using [USB QC 3.0 module](https://www.aliexpress.com/item/32955045499.html)) Next on: * Fume extractor using 92mm fan * [Parts tester](https://www.aliexpress.com/item/32880599220.html) * Might do a bluetooth speaker later on Interconnection done by 14GA silicon wire. Connectors are XT60 Switches 15x21 Currently powered by 20V 100W power supply, Voltage is currently limited by the oscilloscope step-down module (max 23V) and USB QC3 module (max 32V) Backplates can be added if required Base file for Fusion360 can be used to create additional components to e-Lab Printing it with front face vertically to hotbed
Statistics
Likes
156
Downloads
0