Anycubic Trigorilla 50mm turbo fan mount for stepper drivers cooling
Description
This is a modified support for Trinamic stepper drivers cooling fan to fit a 50mm turbo fan blower on a Trigorilla v1.1 board. It requires a short M3 screw with nut on the board and a long M3 screw (without nut) on the fan. I loved this support as it is simple and efficient: cooling the drivers with the direct wind and the whole board with the air movement. I did prefer it to the tunnel models, so I decided to modify it for my 50mm turbo fan which grants more cooling than the 40mm original one. I personally used a Ueetek fan model for my three TMC2208 drivers, as you can see in the photos. For optimal dissipation of the whole system, I suggest to also apply five aluminum heatsinks (those for Raspberry Pi are fine): on the processor (14x14x5mm heatsink) and on the four mosfets (8x8x5mm heatsinks). Enjoy!
Statistics
Likes
0
Downloads
0