Steering wheel for OpenRC F1
Description
Hi! As my kid will not yet ask for the RC part, I thought it could be fun to add this stuff. Steering arm is based on the lower part of servo saver, you will need a 70+ mm push rod to connect. The chassis I used is the original one, I will add updated version later. But basically modification is just a chamfered hole in the front part. The steering wheel is modeled from the MacLaren version 2019, as Daniel likes them a lot ;) Please note that it's not 100% accurate, I'm not skilled enough for that! 2 more MF6S screws are needed, fully tightened on the steering wheel and with a little play on the chassis (or thighten everything if you don't want to turn :D ) One important point: I haven't printed and tested it myself as my printer should arrived mid December... So if there is not enough space to turn the steering wheel fully, please let me know. A longer servo saver arm will do the trick.
Statistics
Likes
11
Downloads
0