UL Lipless Crankbait #15
Description
This super easy-printable lipless crank is a fenomenal lure! Building this bait is super easy. You need to 3D print the two halves, place some lead beeds in the belly (as many as you can) and glue them together. Then use a 0.8mm drill bit to clean the holes and install the hook hangers and line tie. Add some paint and you're ready to catch a fish! Printing settings suggestions: - 0.5mm nozzle (0.4mm for finer details) - 0.15mm layer heigth - 2 perimeters - 2 bottom layers, 4 top layers - 5-20% gyroid infill. - ABS filament Filament type note: I decided to go for ABS since it is a little bit more buoyant than PLA. ABS is also easier to sand and paint. Hope you'll enjoy it! If you whant to support my work please consider downloading this file from turbosquid : https://www.turbosquid.com/FullPreview/Index.cfm/ID/1447068 Thanks!
Statistics
Likes
18
Downloads
0